Repository for Oil and Gas Energy Research (ROGER)

Abstract:
A major concern associated with current shale-gas extraction is high consumption of water resources. However, decision-making problems regarding water consumption and shale-gas extraction have not yet been solved through systematic approaches. This study develops a new bilevel optimization problem based on goals at two different levels: minimization of water demands at the lower level and maximization of system benefit at the upper level. The model is used to solve a real-world case across Pennsylvania and West Virginia. Results show that surface water would be the largest contributor to gas production (with over 80.00% from 2015 to 2030) and groundwater occupies for the least proportion (with less than 2.00% from 2015 to 2030) in both districts over the planning span. Comparative analysis between the proposed model and conventional single-level models indicates that the bilevel model could provide coordinated schemes to comprehensively attain the goals from both water resources authorities and energy sectors. Sensitivity analysis shows that the change of water use of per unit gas production (WU) has significant effects upon system benefit, gas production and pollutants (i.e., barium, chloride and bromide) discharge, but not significantly changes water demands.

Abstract:
The development of unconventional oil and gas resources, controversial in many countries, is currently being pursued by the South African government. This activity can have large impacts on the socio-economic and biophysical environments, especially water resources. In South Africa, little consideration has been given to water-related impacts from the perspective of the interrelated people–ecosystem linkages that are necessary for sustainable social and economic development. This article explores specific water-related linkages between facets of the natural and social environments pertaining to unconventional oil and gas extraction, with the objective of achieving more effective water resources management and water policy development.

Abstract:
Hydraulic fracturing has promoted the exploitation of shale oil and natural gas in the United States (U.S.). However, the large amounts of water used in hydraulic fracturing may constrain oil and natural gas production in the shale plays. This study surveyed the amounts of freshwater and recycled produced water used to fracture wells from 2008 to 2014 in Arkansas, California, Colorado, Kansas, Louisiana, Montana, North Dakota, New Mexico, Ohio, Oklahoma, Pennsylvania, Texas, West Virginia, and Wyoming. Results showed that the annual average water volumes used per well in most of these states ranged between 1000 m3 and 30,000 m3. The highest total amount of water was consumed in Texas with 457.42 Mm3 of water used to fracture 40,521 wells, followed by Pennsylvania with 108.67 Mm3 of water used to treat 5127 wells. Water usages ranged from 96.85 Mm3 to 166.10 Mm3 annually in Texas from 2012 to 2014 with more than 10,000 wells fractured during that time. The percentage of water used for hydraulic fracturing in each state was relatively low compared to water usages for other industries. From 2009 to 2014, 6.55% (median) of the water volume used in hydraulic fracturing contained recycled produced water or recycled hydraulic fracturing wastewater. 10.84% (median) of wells produced by hydraulic fracturing were treated with recycled produced water. The percentage of wells where recycled wastewater was used was lower, except in Ohio and Arkansas, where more than half of the wells were fractured using recycled produced water. The median recycled wastewater volume in produced wells was 7127 m3 per well, more than half the median value in annual water used per well 11,259 m3. This indicates that, for wells recycling wastewater, more than half of their water use consisted of recycled wastewater.

Abstract:
Oil and natural gas development in the Bakken shale play of North Dakota has grown substantially since 2008. This study provides a comprehensive overview and analysis of water quantity and management impacts from this development by (1) estimating water demand for hydraulic fracturing in the Bakken from 2008 to 2012; (2) compiling volume estimates for maintenance water, or brine dilution water; (3) calculating water intensities normalized by the amount of oil produced, or estimated ultimate recovery (EUR); (4) estimating domestic water demand associated with the large oil services population; (5) analyzing the change in wastewater volumes from 2005 to 2012; and (6) examining existing water sources used to meet demand. Water use for hydraulic fracturing in the North Dakota Bakken grew 5-fold from 770 million gallons in 2008 to 4.3 billion gallons in 2012. First-year wastewater volumes grew in parallel, from an annual average of 1?135?000 gallons per well in 2008 to 2?905?000 gallons in 2012, exceeding the mean volume of water used in hydraulic fracturing and surpassing typical 4-year wastewater totals for the Barnett, Denver, and Marcellus basins. Surprisingly, domestic water demand from the temporary oilfield services population in the region may be comparable to the regional water demand from hydraulic fracturing activities. Existing groundwater resources are inadequate to meet the demand for hydraulic fracturing, but there appear to be adequate surface water resources, provided that access is available.

Abstract:
Unconventional shale gas development holds promise for reducing the predominant consumption of coal and increasing the utilization of natural gas in China. While China possesses some of the most abundant technically recoverable shale gas resources in the world, water availability could still be a limiting factor for hydraulic fracturing operations, in addition to geological, infrastructural, and technological barriers. Here we project the baseline water availability for the next 15 years in Sichuan Basin, one of the most promising shale gas basins in China. Our projection shows that continued water demand for the domestic sector in Sichuan Basin could result in high to extremely high water stress in certain areas. By simulating shale gas development and using information from current water use for hydraulic fracturing in Sichuan Basin (20,000-30,000 m3 per well), we project that during the next decade water use for shale gas development could reach 20 to 30 million m3/year, when shale gas well development is projected to be most active. While this volume is negligible relative to the projected overall domestic water use of ~36 billion m3/year, we posit that intensification of hydraulic fracturing and water use might compete with other water utilization in local water-stress areas in Sichuan Basin.

Abstract:
As a prelude to potential development of South Africa’s shale gas resources, it is critical to develop and implement effective groundwater governance arrangements. Existing policies and plans were analysed to determine whether critical gaps or barriers exist that could potentially lead to impacts on groundwater systems. Ten high-priority governance challenges were identified: (a) defining relevant metrics for baseline groundwater quality and availability; (b) developing guidelines for shale gas resource licensing, exploration, drilling, extraction, production, and completion; (c) defining and enforcing compliance monitoring systems; (d) dealing punitively with non-compliant operators; (e) mitigating and managing risks to prevent impairment of groundwater resources; (f) implementing a goal-based regulatory framework; g) enforcing strict chemical disclosure requirements; (h) coordinating across government departments and regulatory bodies meaningfully and productively; (i) implementing a framework for subsidiarity and support to local water management; and (j) providing an incentive framework that supports strong groundwater management and environmental protection. To overcome these challenges, it is recommended that a decentralised, polycentric, bottom-up approach involving multiple institutions is developed to adaptively manage shale gas development. This transition from the current rigid regulatory structure can foster cooperation and collaboration among key stakeholders. The use of a pro-active groundwater governance structure that can accommodate current, near-term, and long-term shale gas development is important for ensuring that future energy development in South Africa incorporates the influence of other simultaneous stressors such as climate (e.g. drought), landuse changes, population growth, industry, and competing demands for water.

Abstract:
We evaluated the overall water footprint of hydraulic fracturing of unconventional shale gas and oil throughout the United States based on integrated data from multiple database sources. We show that between 2005 and 2014, unconventional shale gas and oil extraction used 708 billion liters and 232 billion liters of water, respectively. From 2012 to 2014, the annual water use rates were 116 billion liters per year for shale gas and 66 billion liters per year for unconventional oil. Integrated data from 6 to 10 years of operation yielded 803 billion liters of combined flowback and produced water from unconventional shale gas and oil formations. While the hydraulic fracturing revolution has increased water use and wastewater production in the United States, its water use and produced water intensity is lower than other energy extraction methods and represents only a fraction of total industrial water use nationwide.

Abstract:
We characterize the appropriation of surface water for the extraction of natural gas from Pennsylvania's Marcellus Shale, and we examine the influences of these diversions on stream flows at 300 sites. Our analysis reveals that permitted withdrawals range from 50 m3/d to more than 18,000 m3/d and that water is taken from streams of all sizes, from headwater streams to eighth-order rivers. Flow alteration varies inversely with watershed area and, for larger streams, is compounded by upstream withdrawals. The ratio of daily permitted withdrawal to median stream flow ranges from 0.0001 to unity, although low flows in most, but not all, smaller streams are protected by pass-by flow requirements. Temporal changes in surface water withdrawals track gas well completion activity, rather than changes in operational strategies, and while reuse of wastewater has increased since 2009, freshwater accounted for 75% of water used in hydraulic fracturing through the peak in gas well completion activity.

Abstract:
Until now, up-to-date, comprehensive, spatial, national-scale data on hydraulic fracturing water volumes have been lacking. Water volumes used (injected) to hydraulically fracture over 263,859 oil and gas wells drilled between 2000 and 2014 were compiled and used to create the first U.S. map of hydraulic fracturing water use. Although median annual volumes of 15,275 m3 and 19,425 m3 of water per well was used to hydraulically fracture individual horizontal oil and gas wells, respectively, in 2014, about 42% of wells were actually either vertical or directional, which required less than 2600 m3 water per well. The highest average hydraulic fracturing water usage (10,000−36,620 m3 per well) in watersheds across the United States generally correlated with shale-gas areas (versus coalbed methane, tight oil, or tight gas) where the greatest proportion of hydraulically fractured wells were horizontally drilled, reflecting that the natural reservoir properties influence water use. This analysis also demonstrates that many oil and gas resources within a given basin are developed using a mix of horizontal, vertical, and some directional wells, explaining why large volume hydraulic fracturing water usage is not widespread. This spatial variability in hydraulic fracturing water use relates to the potential for environmental impacts such as water availability, water quality, wastewater disposal, and possible wastewater injection-induced earthquakes.

Abstract:
Major challenges of water use in the drilling and fracturing process in shale gas production are large volumes required in a short-period of time and the nonsteady nature of wastewater treatment. A new mixed-integer linear programming (MILP) model for optimizing capital investment decisions for water use for shale gas production through a discrete-time representation of the State-Task Network is presented. The objective is to minimize the capital cost of impoundment, piping, and treatment facility, and operating cost including freshwater, pumping, and treatment. The goal is to determine the location and capacity of impoundment, the type of piping, treatment facility locations and removal capability, freshwater sources, as well as the frac schedule. In addition, the impact of several factors such as limiting truck hauling and increasing flowback volume on the solution is examined. A case study is optimized to illustrate the application of the proposed formulation. (c) 2015 American Institute of Chemical Engineers AIChE J, 61: 1770-1782, 2015

Abstract:
Advances in horizontal drilling coupled with hydraulic fracturing have unlocked trillions of cubic feet (billions of cubic meters) of natural gas and billions of barrels (millions of cubic meters) of petroleum in shale plays across the United States. There are over 72,000 unconventional well sites in the United States, with anywhere from 2 to 13 million gallons (7500–49,000 cubic meters) of water used per unconventional well. While unconventional wells produce approximately 35% less waste water per unit of gas than conventional wells, the sheer number of wells and amount of oil and gas being produced means that water use has increased by as much as 500% in some areas. Such large water demands give rise to questions about water management, including acquisition, transportation, storage, treatment, and disposal. While these issues vary by play, some key concerns include competition for drinking water sources, impacts of fresh and wastewater transportation, the extent of wastewater recycling, contamination, and the effects of various treatment and disposal methods on communities and watersheds. These concerns have not been fully resolved, yet there is a noticeable, and largely quantifiable, evolution of management practices toward operating more sustainably and with smaller regional impacts. Here we explore water management issues as they arise throughout the unconventional drilling process, particularly focusing on how practices have changed since the beginning of the shale boom and how these issues vary by play.

Abstract:
Shale gas is currently being explored in Europe as an alternative energy source to conventional oil and gas. There is, however, increasing concern about the potential environmental impacts of shale gas extraction by hydraulic fracturing (fracking). In this study, we focussed on the potential impacts on regional water resources within the Baltic Basin in Poland, both in terms of quantity and quality. The future development of the shale play was modeled for the time period 2015-2030 using the LUISA modeling framework. We formulated two scenarios which took into account the large range in technology and resource requirements, as well as two additional scenarios based on the current legislation and the potential restrictions which could be put in place. According to these scenarios, between 0.03 and 0.86 % of the total water withdrawals for all sectors could be attributed to shale gas exploitation within the study area. A screening-level assessment of the potential impact of the chemicals commonly used in fracking was carried out and showed that due to their wide range of physicochemical properties, these chemicals may pose additional pressure on freshwater ecosystems. The legislation put in place also influenced the resulting environmental impacts of shale gas extraction. Especially important are the protection of vulnerable ground and surface water resources and the promotion of more water-efficient technologies.

Abstract:
The optimal design and operations of water supply chain networks for shale gas production is addressed. A mixed-integer linear fractional programming (MILFP) model is developed with the objective to maximize profit per unit freshwater consumption, such that both economic performance and water-use efficiency are optimized. The model simultaneously accounts for the design and operational decisions for freshwater source selection, multiple transportation modes, and water management options. Water management options include disposal, commercial centralized wastewater treatment, and onsite treatment (filtration, lime softening, thermal distillation). To globally optimize the resulting MILFP problem efficiently, three tailored solution algorithms are presented: a parametric approach, a reformulation-linearization method, and a novel Branch-and-Bound and Charnes-Cooper transformation method. The proposed models and algorithms are illustrated through two case studies based on Marcellus shale play, in which onsite treatment shows its superiority in improving freshwater conservancy, maintaining a stable water flow, and reducing transportation burden. (C) 2014 American Institute of Chemical Engineers

Abstract:
ABSTRACT This paper reviews recent developments in the production and use of unconventional natural gas in the United States with a focus on water and greenhouse gas emission implications. If unconventional natural gas in the U.S. is produced responsibly, transported and distributed with little leakage, and incorporated into integrated energy systems that are designed for future resiliency, it could play a significant role in realizing a more sustainable energy future; however, the increased use of natural gas as a substitute for more carbon intensive fuels will alone not substantially alter world carbon dioxide concentration projections. This paper reviews recent developments in the production and use of unconventional natural gas in the United States with a focus on environmental impacts. Specifically, we focus on water management and greenhouse gas emission implications. If unconventional natural gas in the United States is produced responsibly, transported and distributed with little leakage, and incorporated into integrated energy systems that are designed for future resiliency, it could play a significant role in realizing a more sustainable energy future. The cutting-edge of industry water management practices gives a picture of how this transition is unfolding, although much opportunity remains to minimize water use and related environmental impacts. The role of natural gas to mitigate climate forcing is less clear. While natural gas has low CO2 emissions upon direct use, methane leakage and long term climate effects lead to the conclusion that increased use of natural gas as a substitute for more carbon intensive fuels will not substantially alter world carbon dioxide concentration projections, and that other zero or low carbon energy sources will be needed to limit GHG concentrations. We conclude with some possible avenues for further work.

Abstract:
There is increasing concern about water constraints limiting oil and gas production using hydraulic fracturing (HF) in shale plays, particularly in semiarid regions and during droughts. Here we evaluate HF vulnerability by comparing HF water demand with supply in the semiarid Texas Eagle Ford play, the largest shale oil producer globally. Current HF water demand (18 billion gallons, bgal; 68 billion liters, bL in 2013) equates to ∼16% of total water consumption in the play area. Projected HF water demand of ∼330 bgal with ∼62 000 additional wells over the next 20 years equates to ∼10% of historic groundwater depletion from regional irrigation. Estimated potential freshwater supplies include ∼1000 bgal over 20 yr from recharge and ∼10 000 bgal from aquifer storage, with land-owner lease agreements often stipulating purchase of freshwater. However, pumpage has resulted in excessive drawdown locally with estimated declines of ∼100–200 ft in ∼6% of the western play area since HF began in 2009–2013. Non-freshwater sources include initial flowback water, which is ≤5% of HF water demand, limiting reuse/recycling. Operators report shifting to brackish groundwater with estimated groundwater storage of 80 000 bgal. Comparison with other semiarid plays indicates increasing brackish groundwater and produced water use in the Permian Basin and large surface water inputs from the Missouri River in the Bakken play. The variety of water sources in semiarid regions, with projected HF water demand representing ∼3% of fresh and ∼1% of brackish water storage in the Eagle Ford footprint indicates that, with appropriate management, water availability should not physically limit future shale energy production.

Abstract:
We compared water use for hydraulic fracturing (HF) for oil versus gas production within the Eagle Ford shale. We then compared HF water use for Eagle Ford oil with Bakken oil, both plays accounting for two thirds of U.S. unconventional oil production in 2013. In the Eagle Ford, we found similar average water use in oil and gas zones per well (4.7-4.9×10(6) gallons [gal]/well). However, about twice as much water is used per unit of energy (water-to-oil ratio, WOR, vol water/vol oil) in the oil zone (WOR: 1.4) as in the gas zone (water-to-oil-equivalent-ratio, WOER: 0.6). We also found large differences in water use for oil between the two plays, with mean Bakken water use/well (2.0×10(6) gal/well) about half that in the Eagle Ford, and a third per energy unit. We attribute these variations mostly to geological differences. Water-to-oil ratios for these plays (0.6-1.4) will further decrease (0.2-0.4) based on estimated ultimate oil recovery of wells. These unconventional water-to-oil ratios (0.2-1.4) are within the lower range of those for U.S. conventional oil production (WOR: 0.1-5). Therefore, the U.S. is using more water because HF has expanded oil production, not because HF is using more water per unit of oil production.

Abstract:
AbstractStudy region The Marcellus Shale, New York State, USA. Study focus Development of natural gas resources within the Marcellus Shale will require large volumes of water if high-volume hydraulic fracturing expands into New York State. Although this region has ample fresh water resources, it is necessary to explore the response of hydraulically connected groundwater and surface water systems to large withdrawals. Because such effects would not be apparent from a typical water budget approach, this study applied groundwater flow modelling under scenarios of high-volume water withdrawals. Emphasis on water quantity, in contrast with other lines of research concerning water quality, introduced an important perspective to this controversial topic. New hydrological insights for the region The potential effects of the withdrawal scenarios on both the water table and stream discharge were quantified. Based on these impact results, locations in the aquifer and stream networks were identified, which demonstrate particular vulnerability to increased withdrawals and their distribution. These are the locations of importance for planners and regulators who oversee water permitting, to reach a sustainable management of the water resources under changing conditions of energy and corresponding water demand.

Abstract:
Improvements in horizontal drilling and hydrofracturing have revolutionized the energy landscape by allowing the development of so-called “unconventional” gas resources. The Marcellus play in the northeastern U.S.A. documents how fast this technology developed: the number of unconventional Marcellus wells in Pennsylvania (PA) increased from 8 in 2005 to ~ 7234 today. Publicly available databases in PA show only rare evidence of contamination of surface and groundwaters. This could document that incidents that impact PA waters have been relatively rare and that contaminants were quickly diluted. However, firm conclusions are hampered by i) the lack of information about location and timing of incidents; ii) the tendency to not release water quality data related to specific incidents due to liability or confidentiality agreements; iii) the sparseness of sample and sensor data for the analytes of interest; iv) the presence of pre-existing water impairments that make it difficult to determine potential impacts from shale-gas activity; and v) the fact that sensors can malfunction or drift. Although the monitoring data available to assess contamination events in PA are limited, the state manages an online database of violations. Overall, one fifth of gas wells drilled were given at least one non-administrative notice of violation (NOV) from the PA regulator. Through March 2013, 3.4% of gas wells were issued NOVs for well construction issues and 0.24% of gas wells received NOVs related to methane migration into groundwater. Between 2008 and 2012, 161 of the ~ 1000 complaints received by the state described contamination that implicated oil or gas activity: natural gas was reported for 56% and brine salt components for 14% of the properties. Six percent of the properties were impacted by sediments, turbidity, and/or drill cuttings. Most of the sites of groundwater contamination with methane and/or salt components were in previously glaciated northern PA where fracture flow sometimes allows long distance fluid transport. No cases of subsurface transport of fracking or flowback fluids into water supplies were documented. If Marcellus-related flowback/production waters did enter surface or groundwaters, the most likely contaminants to be detected would be Na, Ca, and Cl, but those elements are already common in natural waters. The most Marcellus-specific “fingerprint” elements are Sr, Ba, and Br. For example, variable Br concentrations measured in southwestern PA streams were attributed to permitted release of wastewaters from unconventional shale gas wells into PA streams through municipal or industrial wastewater treatment plants before 2011. Discharge has now been discontinued except for brines from a few plants still permitted to discharge conventional oil/gas brines after treatment. Overall, drinking water supply problems determined by the regulator to implicate oil/gas activities peaked in frequency in 2010 while spill rates increased through 2012. Although many minor violations and temporary problems have been reported, the picture that emerges from PA is that the fast shale-gas start may have led to relatively few environmental incidents of significant impact compared to wells drilled; however, the impacts remain difficult to assess due to the lack of transparent and accessible data.

Abstract:
Efficient use of water, particularly in the western U.S., is an increasingly important aspect of many activities including agriculture, urban and industry. As the population increases and agriculture and energy needs continue to rise, the pressure on water and other natural resources is expected to intensify. Recent advances in technology have stimulated growth in oil and gas development as well as increasing the industry?s need for water resources. This study provides an analysis of how efficiently water resources are used for unconventional shale development in Northeastern Colorado. The study is focused on the Wattenberg Field in the Denver-Julesberg Basin. The 2,000 square mile field located in a semi-arid climate with competing agriculture, municipal, and industrial water demands was one of the first fields where widespread use of hydraulic fracturing was implemented. The consumptive water intensity is measured using a ratio of the net water consumption and the net energy recovery and is used to measure how efficiently water is used for energy extraction. The water and energy use as well as energy recovery data were collected from 200 Noble Energy Inc. wells to estimate the consumptive water intensity. The consumptive water intensity of unconventional shale in the Wattenberg is compared with the consumptive water intensity for extraction of other fuels for other energy sources including coal, natural gas, oil, nuclear, and renewables. 1.4 to 7.5 million gallons is required to drill and hydraulically fracture horizontal wells before energy is extracted in the Wattenberg Field. However, when the large acute water demand is normalized to the amount of energy produced over the lifespan of a well, the consumptive water intensity is estimated to be between 1.8 and 2.7 gal/MMBtu and is similar to surface coal mining.

Abstract:
Almost all of the water used for developing Marcellus Shale gas is withdrawn from surface water sources. State environmental and interstate water authorities take different approaches to managing these withdrawals. In the Upper Ohio River Basin, which covers the western third of Pennsylvania, the Pennsylvania Department of Environmental Protection requires that all water sources used for development have an approved water management plan. For surface water sources the plans stipulate the amount and timing of withdrawals from each source as a function of annual streamflow statistics. Neighboring regulatory authorities and some environmental groups now favor the use of monthly streamflow statistics to establish the conditions for water withdrawals. Our analysis indicates that, given the state of flow measurement data in the Upper Ohio River Basin, the annual streamflow statistics are more likely to prevent water withdrawals during the driest times of the year when aquatic ecosystems are most stressed, and to result in fewer and smaller occurrences of computed low-flow ecodeficits.

Abstract:
Shale gas production represents a large potential source of natural gas for the nation. The scale and rapid growth in shale gas development underscore the need to better understand its environmental implications, including water consumption. This study estimates the water consumed over the life cycle of conventional and shale gas production, accounting for the different stages of production and for flowback water reuse (in the case of shale gas). This study finds that shale gas consumes more water over its life cycle (13-37 L/GJ) than conventional natural gas consumes (9.3-9.6 L/GJ). However, when used as a transportation fuel, shale gas consumes significantly less water than other transportation fuels. When used for electricity generation, the combustion of shale gas adds incrementally to the overall water consumption compared to conventional natural gas. The impact of fuel production, however, is small relative to that of power plant operations. The type of power plant where the natural gas is utilized is far more important than the source of the natural gas.

Abstract:
A common goal of water and energy management is to maximize the supply of one while minimizing the use of the other, so it is important to understand the relationship between water use and energy production. A larger proportion of horizontal wells and an increasing number of hydraulically fractured well bores are being completed in the United States, and consequently increasing water demand by oil and gas operations. Management, planning, and regulatory decisions for water, oil, and gas are largely made at the state-level; therefore, it is necessary to aggregate water use and energy production data at the state-scale. The purpose of this paper is to quantify annual volumes of water used for completion of oil and gas wells, coproduced during oil and gas production, injected via underground injection program wells, and used in water flooding operations. Data from well completion reports, and tax commission records were synthesized to arrive at these estimates for Oklahoma. Hydraulic fracturing required a median fluid volume of 11,350 m(3) per horizontal well in Oklahoma. Median fluid volume (~15,774 m(3)) and volume per perforated interval (15.73 m(3) m(-1)) were highest for Woodford Shale horizontal wells. State-scale annual water use for oil and gas well completions was estimated to be up to 16.3 Mm(3) in 2011 or less than 1% of statewide freshwater use. Statewide annual produced water volumes ranged from 128.5 to 146.6 Mm(3), with gas wells yielding an estimated 72.4% of the total coproduced water. Volumes of water injected into underground injection control program wells ranged from 206.8 to 305.4 Mm(3), which indicates that water flooding operations may use up to 167.0 Mm(3) per year. State-scale water use estimates for Oklahoma could be improved by requiring oil and gas operators to supplement well completion reports with water use and water production data. Reporting of oil and gas production data by well using a unique identifier (i.e., API number) would also allow for refinement of produced water quantity information. Reporting of wastewater disposal and water flooding volumes could be used to further develop state-scale water accounting and best management practices.

Abstract:
We present results of a life cycle assessment (LCA) of Marcellus shale gas used for power generation. The analysis employs the most extensive data set of any LCA of shale gas to date, encompassing data from actual gas production and power generation operations. Results indicate that a typical Marcellus gas life cycle yields 466 kg CO2eq/MWh (80% confidence interval: 450-567 kg CO2eq/MWh) of greenhouse gas (GHG) emissions and 224 gal/MWh (80% CI: 185-305 gal/MWh) of freshwater consumption. Operations associated with hydraulic fracturing constitute only 1.2% of the life cycle GHG emissions, and 6.2% of the life cycle freshwater consumption. These results are influenced most strongly by the estimated ultimate recovery (EUR) of the well and the power plant efficiency: increase in either quantity will reduce both life cycle freshwater consumption and GHG emissions relative to power generated at the plant. We conclude by comparing the life cycle impacts of Marcellus gas and U.S. coal: The carbon footprint of Marcellus gas is 53% (80% CI: 44-61%) lower than coal, and its freshwater consumption is about 50% of coal. We conclude that substantial GHG reductions and freshwater savings may result from the replacement of coal-fired power generation with gas-fired power generation.

Abstract:

Abstract:
Shale-gas production using hydraulic fracturing of mostly horizontal wells has led to considerable controversy over water-resource and environmental impacts. The study objective was to quantify net water use for shale-gas production using data from Texas, which is the dominant producer of shale gas in the U.S. with a focus on three major plays: the Barnett Shale (similar to 15 000 wells, mid-2011), Texas-Haynesville Shale (390 wells), and Eagle Ford Shale (1040 wells). Past water use was estimated from well-completion data, and future water use was extrapolated from past water use constrained by shale-gas resources. Cumulative water use in the Barnett totaled 145 Mm(3) (2000-mid-2011). Annual water use represents similar to 9% of water use in Dallas (population 1.3 million). Water use in younger (2008-mid-2011) plays, although less (6.5 Mm(3) Texas-Haynesville, 18 Mm(3) Eagle Ford), is increasing rapidly. Water use for shale gas is <1% of statewide water withdrawals; however, local impacts vary with water availability and competing demands. Projections of cumulative net water use during the next 50 years in all shale plays total similar to 4350 Mm(3), peaking at 145 Mm(3) in the mid-2020s and decreasing to 23 Mm(3) in 2060. Current freshwater use may shift to brackish water to reduce competition with other users.

Abstract:
Shale gas resources are relatively plentiful in the United States and in many countries and regions around the world. Development of these resources is moving ahead amidst concerns regarding environmental risks, especially to water resources. The complex nature of this distributed extractive industry, combined with limited impact data, makes establishing possible effects and designing appropriate regulatory responses challenging. Here we move beyond the project level impact assessment approach to use regional collective impact analysis in order to assess a subset of potential water management policy options. Specifically, we examine hypothetical water withdrawals for hydraulic fracturing and the subsequent treatment of wastewater that could be returned or produced from future active shale gas wells in the currently undeveloped Susquehanna River Basin region of New York. Our results indicate that proposed water withdrawal management strategies may not provide greater environmental protection than simpler approaches. We suggest a strategy that maximizes protectiveness while reducing regulatory complexity. For wastewater treatment, we show that the Susquehanna River Basin region of New York State has limited capacity to treat wastewater using extant municipal infrastructure. We suggest that modest private investment in industrial treatment facilities can achieve treatment goals without putting public systems at risk. We conclude that regulation of deterministic water resource impacts of shale gas extraction should be approached on a regional, collective basis, and suggest that water resource management objectives can be met by balancing the need for development with environmental considerations and regulatory constraints.